How to Wear Blackhawk Serpa Concealment Holster?

Blackhawk Serpa Concealment Holster is designed to keep your gun concealed and accessible. This holster is made for civilian use with a Serpa Auto Lock release that allows you to draw your firearm when needed quickly, as well as a rotating hood guard that will protect the weapon from being drawn by anyone other than you. A rear sight channel and front screw adjustments allow for a custom fit to your handgun. It can be adjusted for maximum concealment with the detachable belt loop. 

Table of Contents

It is made from injection-molded polymer and designed to free-float with your gun’s barrel to help maintain a fast, natural draw in any position. This holster can also be worn in the FBI-style vertical orientation for strong side carry or the belt loop screws rotated forward for cross-draw use.

This article will cover that how to wear Blackhawk Serpa Concealment holster? And also the steps of wearing the holster with safety instructions.

Parts and Nomenclature of Blackhawk Serpa Holster

You must know what the parts of your holster are called to understand how it works.

Serpa Finger Tray 

The finger tray is located on the inside of your holster, and it helps you get a better grip on your weapon.

Serpa Auto-Lock

The BlackHawk holster has an auto-lock system with a release button located outside your holster where you can easily reach it. 

Belt Loop

The belt loop is the part of your holster that attaches to your belt with a snap.

Paddle

The paddle is located on the backside of the holster. It is made of plastic, and it swivels to move with you when you are wearing your holster.

Passive Retention 

The passive retention screws are located on the side of your holster. This is what controls the weapon inside the holster and keeps it in place. You release the gun by pressing down on the release button, which is located above your belt.

Steps to Wear Blackhawk Serpa Concealment Holster

You should wear your holster on the small of your back. You can wear it in front, but it is easier to conceal when wearing it on your back.

  1. Start by removing the holster from its package and getting the paddle attachment ready. Put the paddle part of the holster through the loop in your pants. Put the belt loop on the bottom of your weapon over the opening at the end of your belt. Pull up until you can see the belt loop on your gun.
  2. Open the holster by pressing down the release button on the outside of your holster with your thumb. Put your finger through the finger tray and grab onto your weapon. Pull straight up until you can see it through the opening in the top of your holster.
  3. Once you have your weapon in your hand, continue to hold it through the finger tray. The gun should be pointing down towards the ground. Make sure that the holster is facing in the same direction as your weapon, so when you draw it out of the holster later, there won’t be any problems with how it comes out.
  4. If you are right-handed, slide your left thumb over the paddle attachment on your belt loop and align it below your waist button to hold it securely in place against your body when walking around or doing other movements.
  5. If necessary, adjust the position by turning toward either side until all weaknesses are adequately covered for complete comfortability drawing from the holster while standing straight up.
  6. To make sure that your holster is pointing in the right direction when you put it back on, flip the safety lever up and over, so it’s facing away from your body. You can also attach a belt clip if you prefer to use one instead of a paddle attachment.
Steps To Wear Blackhawk Serpa Concealment Holster

Safety Instructions for Holster

It is essential always to follow the safety instructions that come with your holster.  

  1. Ensure that your holster is securely attached to your belt loop, not your pants or belt.   Make sure it’s tight enough so you won’t need to readjust it while you are wearing your holster.
  2. If you are right-handed, your holster should be worn on the small of your back with the paddle attachment and belt loop on your left side.
  3. Pistols with hammer spurs or sharp edges like Sigs Saur and Ruger P series will inhibit the safety-lever’s safety function, resulting in unexpected firing if holstering.
  4. It is important to note that passive retention does not keep your weapon in the holster when running or doing other movements. You should still hold onto it securely with your hand. Don’t twist around any more than necessary, and always make sure to grab your weapon before you stand up after bending down.
  5. To adjust to fit your body, it is necessary to loosen the screw on the passive retention device at the bottom of the holster. Then tighten it back up when you have found where you want it. At first, try tightening and loosening it a few times to get an idea of where you will need to be before you put the holster on.
  6. You must unload your weapon and ensure it is safe to carry in your holster when wearing or holstering. Make sure that it is not loaded, cocked, nor chambered.
  7. It is also essential to clean your holster regularly to maintain its good condition over time. These are just a few of the most critical things you need to know about wearing a holster, but it’s always best to have more knowledge than less when it comes to something like this. 
  8. Do not use modified or non-specification trigger guards as they may disengage the auto-lock and result in unexpected firing.
  9. Do not place the holster on a hard or sharp surface.
Safety Instructions for Holster

FAQs

According to the dictionary, CQC stands for close-quarters combat. This means that a holster type classified as a CQC holster would be suitable for carrying around in tight quarters such as in a building or within a ship.

Double major in Engineering and Geology at the University of Minnesota. Experienced shooter & hunter for over 15 years. Certified NRA officer for over 10 years working as a writer at Ballachy.com .

Blackhawk holster is a very safe Blackhawk holster. Simply because of the safety mechanism on this Blackhawk Serpa holster. Make sure your weapon will not fire if it accidentally drops from the holster.

Blackhawk Serpa holster is perfect. There have been lots of positive reviews on the Blackhawk Serpa holster. You can read all the reviews on amazon.

Conclusion

To properly wear a Blackhawk Serpa Concealment Holster, you must first familiarize yourself with the safety instructions. These are detailed in this article, but we have summarized them here for your convenience as well. Be sure not to touch the trigger of your weapon or holster while holstering it, safety levers, and always keep your finger off the trigger until you’re ready to fire. 

Author Profile

Gabriel Tackett
Double major in Engineering and Geology at the University of Minnesota. Experienced shooter & hunter for over 15 years. Certified NRA officer for over 10 years working as a writer at Ballachy.com .
Ballachy
Logo
Shopping cart