Hexmag vs Pmag, these two fantastic-plastic wonders, are some of the best-selling magazines on the market.
If you’re looking for a new magazine to replace your old one, Hexmag vs. Pmag may be the answer. Both of these magazines are very reliable and durable, but they have two different styles that will work better for some people.
Table of Contents
Hexmag and Pmags are both made of aluminum. Hexmags have .020 inch thick walls, which is much broader than the .007 thickness Pmag has. The Hexmag’s serve as a better barrier to moisture and debris intrusion because it provides more protection for its contents.
While many accessories can undoubtedly elevate your shooting experience, your rifle is useless without a good magazine. Whether you’ve just purchased your first AR-15 or own multiple AR-platform rifles, you must buy high-quality accessories.
When someone mentions “must-have magazines” for the AR platform, many shooters immediately think of Pmag Vs. Hexmag. There’s a reason for that; these two fantastic-plastic wonders are some of the best-selling magazines on the market.
This blog post will give an in-depth look at Hexmag vs. Pmag so that you can decide which one will work best for you.
Parts Of A Magazine
There are four parts to a magazine:
- Lip or extension
These parts hold ammo when using stripper clips or loading by hand into the top of the magazine.
Pmags use a steel frame prone to bending because they’re made out of metal, so it’s not as durable over time but can be straightened back into position if bent slightly too far. Hexmags use an aluminum frame and have been able to withstand being dropped without any problems at all.
What Is Hexmag?
Hexmag magazines are reliable and trustworthy options tested and approved by the National Tactical Officers Association for guns. The hexagonal pattern is designed to provide the ultimate in grip. The magazine features a linear feed system and an anti-tilt follower for smooth feeding every time.
They are strong, lightweight, and loaded with innovative features and patented designs. Their features include the industry’s first ammo ID system, stainless steel internal springs, texture surface design, and torture-tested design.
- Provide a firm grip
- Has an ammo ID system for identification
- It comes in different round capacities
- Stainless steel internal springs
- Texture surface designed to provide the best grip
- Excellent visual identification
- An ideal choice for law enforcement officers, competitive shooters, and hunters.
What Is Pmag?
As you likely know, Pmag is manufactured by the famous Magpul industries. Magpul was founded in central Texas in 1999. During their first few years in existence, Magpul focused on developing magazine pulls to assist front-line shooters in improving reload times.
Pmag magazines have a reputation for being one of the most trusted magazine brands in the world. Pmag magazines are reliable, durable, affordable options with no-hassle installation. They have been tested on multiple AR platforms and are engineered to perform in the harshest conditions.
- Available in a variety of capacities from 20 to 100 rounds
- Steel reinforced polymer with impact-absorbing rubber spacers
- Lockable dust cover and stainless steel spring
- Pmag magazines are made of industrial-strength materials for corrosion resistance.
- Durability as well as weight savings without sacrificing reliability or magazine capacity
Hexmag vs. Pmag, Which Is Better?
We have tried to differentiate both the types of magazines based on few features as follows:
Color of follower and base plates:
Hexmag has a spectrum of different color options for replacement follower and base plates, which help choose a color scheme for ammunition variation and quick identification regardless of the end you are looking for in the magazine. You can find Hexmag in either Red or Black, whereas Pmag is available only in black and has a follower made of metal.
Hexmag comes with a follower that is easily removable and replaceable. You can either use the hex-shaped plates or standard round ones, depending on your need and usage.
The base plate of Pmag is made up of metal, whereas Hexmag has a polymer-based follower and baseplate.
Hexmag is the cheaper option. Pmags are more expensive than Hexmags in general; PMAG 30 AR/M16 A-TACS IX (AR), for instance, costs $14.00, while a single Hexmag plus 40 magazines will cost you just $12.99.
Strength and feel:
PMAG has a more rigid polymer construction and black follower, whereas Hexmag features an aluminum body that is lighter weight.
Hexmag has a torture-tested design, and it can stand up to all sorts of misuse, whereas Pmag has Next-Generation impact and crush-resistant polymer design.
Hexmag features an EZ Pull textured surface for easy magazine extraction, whereas Pmag has a high-performance self-lubricating follower.
Hexmags are constructed from polymer composite, which makes them lightweight and durable at the same time. It also helps to keep it cost-effective as well.
Pmag magazines use anti-tilt followers more reliable than traditional followers when used for high capacity feeding devices with wide tolerances (i.e., double stack pistol mags). The base plates on this magazine make loading rounds into pouches easier because they are more comprehensive and provide a better grip during reloading operations.
Hexmag offers a lifetime warranty against breakage due to normal usage, while Pmag doesn’t provide a warranty.
Hexmags are much more durable as they don’t start to wear out after only a few months like some other brands such as Magpul Pmags. Which chip quickly when dropped or mishandled even though its polymer composite construction makes them lightweight and easy to carry around.
- Holds up to 20 magazines in water resistant storage box. Compatible with 10, 20, and 30 round magazines (even with ranger plates and dust covers).
- Accessory compartment is built into the top for extra storage space. Mechanical “claw” latch holds down the lid tight.
Pmags spring is stiffer, thicker, and of higher quality. Hexmags spring is more manageable to compress than Pmag. At the same time, Hexmag springs are thinner, weaker, and not high quality.
Bolt catch issues:
A majority of the Pmags have been reported to experience a bolt catch malfunction while cycling rounds, which is an issue that Hexmag does not seem to share. It may be due to its wide mag release and material used in construction.
The Hexmag is an excellent polymer alternative that may be more durable while still keeping the weight down and easy to use. The Pmag, on the other hand, has some design flaws, such as its bolt catch malfunction, which makes it difficult for shooters to complete rounds without manually cycling their magazine release or reloading frequently due to stoppages.
The PMAG is slightly heavier and more expensive than the Hexmag, but it has a significantly higher capacity. The Pmags are available in 30 round versions as well as 40 rounds for AR15 rifles.
Hexmag is not made in the US. The Hexmags are manufactured in Taiwan and distributed from Irvine, California.
The PMAG can be fed through a magazine loader with difficulty because of its bolt catch malfunction that does not allow for complete rounds to be loaded without cycling magazines or reloading frequently due to stoppages.
Based on your model AR-15 rifle caliber, you will need either 30 rounds (AR-15 .223), 40 rounds (.223), or 64 rounds (AR-15 .300 Blackout). You may purchase an olive drab green, black, flat dark earth camo, or clear.
The Hexmags weighs in at just over one pound for the 30 round, 40 round, and 64 rounds version with a thickness of 0.30 inches while being rigid enough that they will not flex under pressure from your thumb- torque lbs (ft/lbs) is around 75 ft/lbs. The PMAGs are heavier by about half an ounce and thicker than their competitors, which may be significant factors when considering long-term use.
Pmags are manufactured in Wisconsin and distributed from California, Irvine – though it should be noted there have been reports of inconsistent quality control among consumers receiving magazines due to a change in production.
Many manufacturers include a polymer magazine when you buy a new rifle, thanks to their comparatively low price point. One of the most significant advantages polymer magazines have over metal magazines is the construction of their feed lips.
The US military does not currently use PMAGS, but they’re made to MIL-SPEC standards for durability. In addition, PMag’s parent company Magpul has been working on making them more durable and lightweight with the help of DARPA funding.
Pmag’s advantages lie in weight savings and price point; both have merit depending on how much money you’re willing to spend or how often you use your AR platform (if at all). If money isn’t an issue for you, then go with Hexmag. Inexpensive and durable.
Hexmags are better for various reasons: they have increased clearance from the mag release button, making removing them easier for right-handed people in particular (a feature not found on many Pmags).
Pmags offer better consistency because they include a patented self-lubricating polymer construction process that improves storage stability while preventing the constant need for lubrication.
Hexmag magazines are a lot more durable than Pmags. Hexmags can take the beating that your rifle will give it, and they won’t let you down when you need them to reload quickly. Magpul also pays attention to what shooters want while designing their products.
Hexmag has an increased clearance from the mag release button, making removing the magazine more accessible for right-and-left-handed people alike. It is not something Pmag offers with most of its models.
As you can see, these two AR magazine options are closely matched. Both are made from high-quality materials that will serve you reliably for years to come. Applying proper maintenance, cleaning, and routine inspections after use will extend the life of your magazines.