Best Way To Determine Scope Ring Height

Imagine a scenario where you are out on the field during your target practice, but something seems to have gone south with your shooting. You have checked through the list of daily routines in keeping your firearm and riflescope efficient, but nothing seems to be missing.

Vortex Optics Pro Series Riflescope Rings

Our best choice in this category is the Vortex Optics Pro Series Riflescope Rings. Due to its lightweight, durable, rock-solid design and a quadruple screw system that fits both Weaver and Picatinny rails, positioning your riflescope at the height of 0.75 inches, there is no way to overlook it.
Is the scope ring height measurable? Yes. The best way to determine scope ring height is not rocket science.

The best way to determine scope ring height is to use a ruler to measure the ring’s height from the ring cradle base or the center of the ring to the contact point on the receiver. Should you have doubts about how accurate your measurement is, do this: measure the diameter of the bolt and divide the result by two. Do the same for the measurement of the objective lens’ diameter.

Use calipers to determine the distance between the scope and receiver, and then add these numbers together. Easy-peasy! Other ways involve set calculations and the use of websites. There are websites where all you have to do is input your rifle and scope details, and the height will be calculated for you. This is an excellent resource for gun stores without measurement tools.

Vortex Optics Pro Series Riflescope Rings – 1 inch – Low Height [0.75 Inches | 19.05 mm], Black
  • These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0.75 inches (19.05 mm) from the base. Sold two rings per package.

Table of Contents

Perhaps, you should also consider checking your scope ring height? Sounds ridiculous?

If the height is wrong, it will affect your shooting precision as you would have to adjust your natural position to use the scope. Hence, the scope ring height is as important as the scope itself.

Here is our top three best tools to determine scope ring height.

Top 3 Best Tools To Determine Scope Ring Height

Vortex Optics Pro Series Riflescope Rings – 1 inch – Low Height [0.75 Inches | 19.05 mm], Black
Fits Weaver and Picatinny Rails.; Weight (Per Ring): 39.9 Grams – 1.41 oz
$59.00
Vortex Optics Hunter 30mm Riflescope Rings – Medium Height (0.94 in)
Made from aircraft-grade 6061-T6 aluminum for optimum strength; Sold two rings per package
$24.00

5 Best Tools To Determine Scope Ring Height (Ranked)

1. Vortex Optics Pro Series Riflescope Rings

Vortex Optics Pro Series Riflescope Rings – 1 inch – Low Height [0.75 Inches | 19.05 mm], Black
  • These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0.75 inches (19.05 mm) from the base. Sold two rings per package.
  • The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.

SPECIFICATIONS:

  • Dimensions: 9.1 x 9.1 x 9.1 inches
  • Weight: 0.2 pounds

Designated as 1 inch low, the Vortex Pro Series Rings place your riflescope at the height of 19.05mm, measuring from the base to the center of the tube. Having been forged with high quality, you can bank on this ring for ultimate accuracy and consistency in combination with its strength and reliability. This is also in addition to the fact that they are lightweight and durable.

For secure mounting, Vortex Pro Series riflescope rings come with four T-25 Torx-style socket cap screws. Also, they fit Weaver and Picatinny rails.

Pros
Cons

2. Vortex Optics Tactical 30mm Riflescope Rings

Vortex Optics Tactical 30mm Riflescope Ring — Medium Height [0.97 Inches | 24.6 mm] – 2 Pack
  • Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.
  • When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.

SPECIFICATIONS:

  • Dimensions: 2 x 1 x 2 inches
  • Weight: 0.19 pounds

The Vortex 30mm Ring positions your riflescope tube at the height of 24.6mm (from the base to the center of the tube), greatly assisting your target precision. This model is an approximately 1-inch Medium tactical ring, perfect for mounting accessories with 30mm tube diameters that fits your Picatinny rail. It comes with six robust screws to ensure secure mounting. We strongly recommend that you lap the rings for a secure fit when using this ring to mount a conventional riflescope.

Pros
Cons

3. Vortex Optics Hunter Riflescope Rings

Vortex Optics Hunter 30mm Riflescope Rings – Medium Height (0.94 in)
  • These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.94 inches (24.0 mm) from the base
  • Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups

SPECIFICATIONS:

  • Dimensions: 4.75 x 4.25 x 0.75 inches
  • Weight: 0.2 pounds

The Vortex Hunter Rings position your riflescope at the height of 24mm (from the base to the center of the tube), making your target acquisition easy. It’s a 30mm Medium ring designed for hunting and can be mounted to a Weaver or Picatinny rail. The presence of a QD (Quick Detach) design makes it easy to install.

Pros
Cons

4. Leopold Rifleman Scope Rings

Sale
Leupold Rifleman Scope Rings
  • Model #55870 – Rifleman Rings 1″ – Detachable High Rings with a Matte finish
  • Precision machined from aircraft grade aluminum

SPECIFICATIONS:

  • Dimensions: 5.4 x 4.7 x 0.8 inches
  • Weight: 0.2 pounds

The Leopold 1 inch detachable high rings are made of aircraft-grade aluminum and machined for precision. They do not add excessive weight to your rifle despite the exceptional strength they provide. Also, these rifleman scope rings are made to fit rifleman scope bases and any Weaver-style scope base; they offer secure mounting due to their proven cross-bolt design.

Pros
Cons

5. Accushot Picatinny/Weaver Medium Profile 2-Piece 1-Inch Rings

SPECIFICATIONS:

  • Dimensions: 8 x 3 x 2 inches
  • Weight: 0.2 pounds

The Accushot 1 inch Medium Ring is terrific for light recoiling firearms. It is quite budgeting friendly, and its setup works appropriately in its budget-based price range. It comes with a four-screw system for fastening your riflescope to your firearm. The Accushot Ring is not fancy but is praised for its ruggedness; that is, before encountering any issue due to loose fastening or whatnot, you could still get a reasonable amount of working time out of them. Also, you could use them on Weaver and Picatinny rails.

Pros
Cons

FAQs

To a certain degree, yes. It’s safe to double-check your size because different manufacturers classify these different sizes to fit different sized objectives.

To determine your scope ring height, you need a ruler or calipers, scope and rifle you intend to mount the scope ring on, and, of course, you need you to figure out the result.

The general rule to determine your scope ring’s height is to ensure the scope is mounted as low as possible without any part of it coming in contact with any part of your firearm.

Load More

Conclusion

As we wrap up, the best way to determine scope height ring, in which we have also included a buying guide, it is noteworthy that there are a variety of options available to you in the market. Still, an important feature to be very considerate of is the weight – a lightweight ring that matches your mounting system is vital.

The truth of the matter is you need not invest much in scope ring; just ensure to get a durable one to secure your scope in place, and a choice from the compiled list above will do the job.

Ballachy
Logo