Best Scope Mount for Marlin 30-30
A Comprehensive Guide
The Marlin 30-30 has been around for many years, and there are a lot of different scope mounts on the market for this rifle. But which one is the best scope mount for Marlin 30-30? That’s what we’re going to cover in this article. In this article, we will give you 8 hand-picked options regarding the best scope mounts for this legendary rifle.
This article will also provide you with the factors that you need to keep in mind when selecting a scope for your gun and as a bonus for the ones who read through the whole thing, there is a step-by-step guide that will tell you how to install scope mounts on your gun at home using common hand tools.
Table of Contents
If you are in a hurry to purchase the best scope mount for Marlin 30-30, and you want to make the best decision, here are our top 3 picks:
Top 3 Best Scope Mount for Marlin 30-30
$53.73
$67
67 new
from 53.19
in stock
How to Mount a Scope on Marlin 30-30?
Fix the Rifle
Get a good screwdriver and in a nice, clean area with a soft surface to sit on fixing your rifle in a vice or similar clamping device. Loosen the screws from your front and rear base making sure they don’t fall inside your rifle [if they do fish them out]. In some cases, you might have to loosen the screws holding your barrel in place to allow it to move, so you can slide the base down the barrel without twisting it.
Slide Down the Front Sight
Normally, when you have a scope mounted, the objective lens is pointing somewhat at your front sight. If you want to keep that tiny bead of steel then you need to unscrew or drill out the front sight. This might seem obvious but many people forget about it and end up with a screwed-up front sight.
Match Rings and Bases
Screw your bases on the rifle, snugly but not too tight (you don’t want to crush your receiver), then match them up with the rings of your scope. A good way to do this, especially if you have a scoped rifle, is to take it out hunting. Hold the rifle so that if you were firing it your eye would be just behind the scope. For example, I shoot lefty so my right eye is up against my rifle scope when I hold it.
Attach Bases
Screw your bases on, making sure to get them even with each other and the receiver [not so tight you crush it though!]. You don’t want a base that’s slightly higher or lower than the adjacent one because that will affect how everything lines up with the rings of your scope.
Locking
It’s a good idea to lock your screw so it doesn’t back out and let the base fall off your rifle. Molex makes ‘Brake-Off’ which is perfect for this kind of job, but it isn’t something you have lying around the house so most people just use a dab of nail polish or super glue.
Align Reticle
Now, with the rifle still fixed in place, you need to line up your reticle where it needs to be so that when you are looking through the scope you are seeing the full view of the target area. If this is a hunting rifle and you can actually see your front sight through your scope, aim at a target and move the rifle so the front sight is on top of your target aiming point. If you don’t see any part of your front sight through your scope (like if it’s an AR-15 or something with no front sight) then just put it in where you want it to be, say 2″ high at 100 yards.
Adjust Eye Relief
Now you need to adjust your eye relief so that when you look through the scope you have a full field of view [if it’s a big scope] and so that when you shoot, your face isn’t pressed up against the stock [this will hurt if there is heavy recoil]. The best way to do this is to sit down, fix the rifle in place [leave it in a vice if you can], look through their scope and move around until everything looks good. When you are ready to shoot, your head should be in line with the scope tube or slightly behind it, not in front of it.
8 Best Scope Mount for Marlin 30-30 (Ranked And Reviewed)
$53.73
$67
29 05 2023
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
22 new
from $53.19
Specifications
-
Style:
One-Piece With Rings
-
Material:
Aluminum
The Game Reaper One-Piece Scope Mount from DNZ Products is lightweight and rugged, with extreme accuracy. It is also the simplest, easiest scope mount to install in the firearms industry. No Lapping Required to install. The Game Reaper One-Piece Scope Mount from DNZ Products is lightweight and rugged, with extreme accuracy. It is also the simplest, easiest scope mount to install in the firearms industry. No Lapping Required to install. The single-piece design provides a rock-solid platform for your optics that will give you impeccable accuracy.
The Game Reaper® Marlin 336-High Mount is the most advanced and effective scope mount available. It is machined from a solid block of 6061T6 aluminum and features totally American-made components, including anodized finish, stainless steel hardware, and tool steel screws. The Game Reaper® High Mount is fully adjustable for windage and elevation as well as side-to-side movement on top of the receiver. The mount also has four times more threads than other mounts on the market giving you rock-solid stability. All that plus it weighs less than one ounce! Available in Matte.
Positive
- Seats down on the rifle tightly for undoubted accuracy
- Very simple and easy to install
- Allows wide range of vertical and horizontal alignment
Negatives
- Some Marlin models need a thin plastic packing to install the mount
2. Leupold Standard One-Piece Scope Base
$18
$0
29 05 2023
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
new
from $
Specifications
-
Style:
One-Piece
-
Material:
Steel
Leupold Standard One-Piece Scope Bases are made of steel and come with a matte black finish. These bases fit Winchester 94, Marlin 30-30, Ruger 10/22, Remington 721 & 725, Savage 64 & 73 series rifles. The front dovetail ring pivots allowing for lateral adjustment using the rear windage screws while bore sighting. Available in 1 inch or 30mm tube diameter to fit most scopes on the market today.
The Leupold Standard One-Piece Scope Base is a precision engineered base that secures the scope to the firearm with four screws. The base’s patented design offers a rock solid mount for your optics, and ensures proper alignment of the receiver and free bore axis. Each one-piece base is machined from 7000 series aluminum to exacting tolerances for an exceptional fit and finish. Available in black matte or silver anodized finishes.
Positive
- 4-screw installation is easy and secure
- Available for different sized scopes
- Made to very tight tolerances for optimum accuracy
Negatives
- No index marks on the base make alignment difficult when you install it
3. WEAVER 1-Inch Steel Lock Mounts for Marlin 336
$21.99
$0
29 05 2023
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
new
from $
$26.92
$0
29 05 2023
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
5 new
from $26.92
Specifications
-
Style:
See-Through Rings
-
Material:
Steel
The Weaver 1-Inch Steel Lock Mounts for Marlin 336 are made of the highest quality materials. They feature see-thru detachable rings, no base required. These mounts will fit right over your existing front sight and tighten down with two screws. This is another quality Bushnell product. The Weaver 1-Inch Steel Lock Mounts for Marlin 336 are highly durable and reliable. They are designed to withstand the harshest conditions you can throw at them without any problems at all!
You can use these mounts. The Weaver 1-Inch Steel Lock Mounts for Marlin 336 is made to mount to specific firearm receivers to enhance fit and performance. Made using steel material, these rings are strong and durable. The mounts feature a strap for added strength and come with the hardware needed for installation. These rings utilize iron sights or your scope for quick target acquisition.
Positive
- Custom-made for Marlin rifles for improved accuracy
- Made to sustain the harshest environmental conditions
- Lets you use the iron sights as well as the scope for acquiring the target
Negatives
- A bit tricky to install on the rifle
4. FUNANASUN M-Lok Picatinny Rail Scope Mount
$0
$0
29 05 2023
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
new
from $
Specifications
-
Style:
Picatinny Rail
-
Material:
Aluminum
This is a scope mount made of Aluminum Alloy. It is lightweight and durable. The screws are hexagonal wrenches, which are easy to install. It can be used on M-Lok rail systems, compatible with 20mm Picatinny rails. FUNANASUN’s scope mounts for the M-lok system will fit any 20mm Picatinny rail system with m-lok slots. This product is made of aluminum alloy, which makes it lightweight but also durable enough to hold your rifle scopes in place for years.
The FUNANASUN M-Lok Picatinny rail scope mount is the best way to improve your shooting accuracy. With 11 slots, it allows you to install various rail mounting accessories, including optical mirrors, alignment mirrors, and laser sights. It’s made of high-quality aluminum alloy materials with an anodized finish for better durability. This scope mount is perfect for most AR15/M16 rifles or any other guns with a Picatinny rail interface. Its lightweight design makes it easy to carry around when hunting or traveling.
Positive
- Easy to attach and detach M-Lok system
- Holds adjustments for years and thousands of rounds
- Supports all common accessories and optics
Negatives
- Provided screws are too long and need to be cut before installation
5. NcStar Marlin Lever Action Weaver Scope Mount
$12.95
$0
29 05 2023
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
4 new
from $12.95
Specifications
-
Style:
Weaver Rail
-
Material:
Aluminum
The NcStar Marlin Lever Action Weaver Scope Mount is the perfect scope mount for your Marlin bolt action rifle. Constructed of hard-anodized aluminum, this mount is built specifically for Merlin bolt action rifles and will fit perfectly on your weapon. It’s easy to install and comes with all necessary mounting hardware. The NcStar Marlin Lever Action Weaver Scope Mount is the ideal way to mount a scope, red dot sight, or other accessories on your Marlin lever-action rifle. This 11-slot weaver style rail lets you use the iron sites on your gun and still has plenty of room for any optics or other accessories. The NcStar Marlin Lever Action Weaver Scope Mount is constructed of aluminum and stainless steel for durability and long-term performance.
Positive
- Anodized aluminum provides added strength while keeping weight low
- You can use the stock sites with the mounts installed
- All the hardware and tools are included in the weapon
Negatives
- The screws are way too long for most applications
6. Higoo Low Profile Top Rail Scope Mount
Higoo Low Profile Top Rail Picatinny/Weaver Scope Mount 11 Slots for Marlin Lever Action with Wrench
$9.95
$0
29 05 2023
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
2 new
from $9.95
Specifications
-
Style:
Picatinny Rail
-
Material:
Aluminum
Higoo Low Profile Top Rail Scope Mount is made of aircraft-grade aluminum alloy. It is solid 11 slots Picatinny rail mount for your optic, scope, laser sight and allows an adjustment in their mounting positions. Designed for bolt action rifles. Made of aircraft-grade aluminum alloy, it is a solid 11 slots Picatinny rail mount for your optic, scope, laser sight and allows an adjustment in their mounting positions.
Designed for bolt action rifles, this scope mount lets you use the weapon without any obstruction. Higoo’s Low Profile Top Rail Scope Mount is a great way to mount your scope on a Marlin 30-30 bolt action rifle. With the low-profile design, you can still use all of your iron sites. The top rail mount will fit any Weaver-style rings and has an allen wrench included with the screws. This mount works best with scopes that have 30mm tubes or less.
Positive
- Allows a lot of adjustment in optics
- Works with all Weaver and Picatinny rings
- Low profile position provides superb accuracy
Negatives
- The provided screws are not very strong
7. Redfield Top Mount Base Pair for Marlin 30-30
$0
$0
29 05 2023
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
new
from $
Specifications
-
Style:
Weaver Rail
-
Material:
Aluminum
Redfield’s Top Mount Base Pair for Marlin 336 is a professional mount that is constructed from aircraft-grade aluminum. It is rugged and lightweight, making it the perfect choice for your firearm. This mount will work with all Weaver cross lock rings as well as the most popular firearms and optics. The Redfield Top Mount Base Pair for Marlin 336 features the legendary Weaver cross lock system that provides an extremely secure fit on your firearm.
Positive
- Works with a wide range of accessories
- Rock solid yet lightweight
- Has the Weaver cross lock system for quick mounting and dismounting
Negatives
- Standard screw slot in the heads are way too wide
8. Persei Mossberg Picatinny/Weaver Rail Mount
$17.39
$0
29 05 2023
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
1 new
from $17.39
Specifications
-
Style:
Weaver Rail
-
Material:
Aluminum
Persei Mossberg Picatinny/Weaver Rail Mount allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics. It is a tactical, low-profile top rail made of high-strength aluminum alloys. The Merlin 30-30 has been America’s favorite for decades. Now you can add more versatility to your rifle with the new Persei Tactical Top Rail! The easy-to-install design features a durable aluminum alloy construction and provides an ideal platform for mounting your favorite accessories like flashlights, lasers, sights, and more. This mount has 13 rail slots that can be used to adjust the location of the optic you are mounting. This gives you a great degree of freedom to adjust eye relief and install the accessories right where you want.
Positive
- Allows a great degree of flexibility in installing accessories
- Won’t add a lot of weight to the rifle
- Doesn’t hinder the normal operation of the rifle
Negatives
- Tolerances for screw holes are large, making alignment difficult
What To Consider While Buying The Best Scope Mount for Marlin 30-30?
This part of this article is dedicated to those who are looking for a scope mount for their Marlin 30-30. If you’re not sure if it’s even possible, don’t worry–it is! I’ll show you how to choose your scope mount based on the factors that are relevant to the Marlin 30-30, and then pick an option that will work best for your purposes. First, what are the factors to consider when buying a scope mount? There are several, but you just need to consider the following three. Thes define how your scope mount is configured and where it attaches to your rifle.
One-Piece Vs Two-Piece
Most scope mounts are either one-piece or two-piece. A one-piece mount attaches directly to the receiver and sits as close as possible to it, covering as much of the receiver as possible. This often leaves less room for open sights, so if you want those you might be out of luck with a one-piece mount. A two-piece mount attaches to the receiver through a single point, which leaves more room for open sights and keeps the scope further away from your eye.
Weaver Vs Picatinny
Another consideration is whether you want a Picatinny or Weaver-style mount. These mounts attach differently than one-piece and two-piece–they attach at the receiver and on a side-arm. I wouldn’t consider this a deal-breaker, but it’s good to know which style your mount is so you can be sure it’ll work with your rifle before buying.
Profile
Ideally, low-profile mounts are the better option as they keep the scope nearer to the barrel and that is great for making accurate shots. However, if you have a 20” barrel Marlin 30-30, having a low-profile mount will make clearing and bolting the rifle difficult. So it’s up to you if you want the ease of use (high-profile mounts) or more accuracy (low-profile mounts).
FAQs
How many bullets does a Marlin 30/30 hold?
The 336XLR and 336Y models are equipped with a tubular magazine that can hold five cartridges. All other variants of the rifle can hold six.
How far can you shoot a Marlin 30-30?
The ME of 30-30 bullets falls well below 1000lb at 200 yards. 150 yards can be considered the effective range of this rifle. There are examples of people shooting down deer beyond 200 yards with this rifle but placing an effective shot at that distance with this rifle is very difficult.
What is the best ammo for a Marlin 30-30?
The best cartridges for Marlin 30-30 for deer hunting are, Remington CORE-LOKT, Winchester Super-X Power Point, Winchester Power-Max Bonded, Hornady FTX LEVERevolution, and Federal Fusion.
Is 30-30 Good for elk?
It is hard to kill elk with a 30-30 but if you can manage to place the bullet in the right spot, a 30-30 can end an elk easily.
Here you can read our other helping articles for Best Marlin 336 Scopes the Best Remington 870 Scope Mounts and Best Scopes for 30-30 Rifles that perfect for your needs.
Conclusion
The top scope bases for the Marlin 30-30 are many, but these few should help you find a good fit. If you’re looking to mount your optics on an old rifle or need something with all of the bells and whistles, there is bound to be one that suits your needs. Whether you’re hunting in wide-open fields where shots can range from 100 yards out to 400 yards away or if it is in dense jungle terrain with limited visibility, we have got what will work best for you! We keep adding outdoor and hunting stuff every day so make sure to come back often. Without further ado, here is our list of some scopes that would be perfect for mounting on this popular rifle model.
Author Profile
- Gabriel Tackett is an experienced shooter and hunter for over 15 years with a degree in Engineering from the University of Minnesota. He is also a certified National Rifle Association (NRA) officer for 10 years And his passion lies in teaching others how to safely enjoy the hobby by recommending the best practices & products in the gun industry.
