Best Choke for Rabbit Hunting
A Comprehensive Guide
The best way to hunt rabbits is when you’re in the field. The only thing that would make it better is if you had a choke for hunting rabbits during your trip. This article will review five of the best choke for rabbit hunting and give you all the information you need to know about them. Which one should be your next purchase? Read on to find out!
Featured Product
[content-egg module=Amazon groups=”t1″ template=custom/bigcart]
But not every reader knows what chokes are and how they can be beneficial in hunting. So, let’s first get some knowledge about chokes, and then we’ll reveal our top picks that you can buy right now.
Table of Contents
If you are in a hurry to purchase the best choke for rabbit hunting, and you want to make the best decision, here are our top 3 picks:
Top 3 Best Choke for Rabbit Hunting
[content-egg-block template=custom/all_offers_list groups =”t1,t2,t3″]
What are Chokes and Why Do You Need Them?
A shotgun choke is a constriction at the muzzle end of a shotgun barrel that affects the dispersion pattern of the fired pellets, which in turn changes the effective range of the shotgun. Shotgun chokes are either screw-in chokes or fixed, permanent chokes. The use of screw-in chokes is more common among avid hunters and sportsmen, whereas the use of permanent chokes is more common among military and law-enforcement personnel. A screw-in choke (the type we are discussing today) gives you the liberty to decide how much the pellets will spread over a specific distance.
For example, if you want to hit a flock of geese, you need the pellets to spread out as wide as possible so that you can hit more of them. A wide choke can make this possible. However, if you want to take down a deer with the same weapon, you can switch to a narrower choke to make sure that the pellets remain in a dense pattern and inflict a fatal wound to the animal.
5 Best Choke for Rabbit Hunting (Ranked And Reviewed)
1. Browning Midas Grade 12 Gauge Choke
[content-egg-block template=custom/all_offers_logo groups=”p1,t1″]
Specifications
- Compatible With:
12 Gauge
- Size:
Improved Cylinder
- Material:
Stainless Steel
The Browning Midas Grade 12 Gauge Choke is the ideal choke for hunting rabbits. It has a spread that gives you maximum effectiveness, but it is still tight enough to be effective on birds as well. It also has a black oxide coating that protects the choke and makes it look great too! Made from high-strength steel, this Browning Midas Grade 12 gauge shotgun choke is designed to give you maximum spread for hunting rabbits.
The black oxide coating on the inner and outer sides of the choke does not only gives it a good look but also protects it against the abrasion of the pellets and environmental factors. Browning Midas Grade 12 Gauge Choke is a choke tube that is made for the Browning Citori. The choke tubes are precision-made to be used with heavy use and still stay tight on your gun. These chokes are easy to install and take off of your gun as well as being very accurate.
Positive
- Provides just the type of patterns needed or rabbit hunting
- Coated for protection against rust
- Can be installed and taken off easily
- Stainless steel construction can sustain heavy loads
Negatives
- Some units have cosmetic defects
2. Browning Invector Plus Extended Choke
[content-egg-block template=custom/all_offers_logo groups=”p2,t2″]
Specifications
- Compatible With:
12 Gauge
- Size:
Improved Cylinder
- Material:
Stainless Steel
Browning’s Invector Plus Extended Choke is constructed of highly polished, 17-4 stainless steel. The extended choke tube is great for turkey hunting or any other shooting application where you need a longer choke to help control the pattern. These chokes are easy to remove and install, making them very convenient for quick changes during your hunt. Available in 12 gauge only, Browning’s Invector Plus Extended Choke features an extended design that helps control patterns at longer distances and makes it easier to hit your target.
Browning Invector Plus Extended Choke tubes are designed for use with lead, copper-plated, and Hevi-Shot® turkey loads. They produce excellent patterns with excellent uniform densities. All Browning tubes are set to industry constriction standards. These choke tubes feature a polished stainless steel finish that reduces glare and is easy to clean. Choose from the following: Light Modified (LM), Modified (M), Improved Cylinder (IC), or Full (F).
Positive
- Longer choke taper for consistent patterns shot after shot
- Available in all sizes
- Doesn’t need a wrench or any other tool to install or remove
- Precision machined to augment accuracy of the weapon
Negatives
- Works with specific models only
3. Carlson’s Long Beard Choke
[content-egg-block template=custom/all_offers_logo groups=”p3,t3″]
Specifications
- Compatible With:
12 Gauge
- Size:
0.650
- Material:
Stainless Steel
Carlson’s Long Beard Choke is designed to increase your accuracy and consistency. It features shot-look technology that allows for the most consistent patterns and a durable and high-performance design. This choke tube is manufactured from 17-4 stainless steel, which makes it highly resistant to corrosion while remaining easy to clean. This choke is finished with a black oxide coating. The black oxide coating is extremely durable and will not rust or corrode.
They are precision machined to exacting tolerances to ensure the perfect fit in your Carlson’s shotgun. Carlson’s Long Beard Choke is one of the best chokes on the market. It has a 25% longer parallel section, thus throwing tighter and denser patterns downrange. It also uses triple shot technology to reduce pellet deformation, shortened shot string, and fewer flyers.
Positive
- Produces uniform patterns at all distances
- Doesn’t deform or otherwise affect the pellets
- Can work with heaviest loads
Negatives
- Patterns are not as tight as advertised
4. Carlson’s Choke Tube 12 Gauge Cremator Non-Ported
[content-egg-block template=custom/all_offers_logo groups=”p4″]
Specifications
- Compatible With:
12 Gauge
- Size:
0.710
- Material:
Stainless Steel
Carlson’s Choke Tubes are made from 17-4 Stainless Steel, the same material used in surgical implants and high-performance auto parts. The parallel section of our tubes is 25% longer than other brands to ensure that there are no size or speed restrictions with steel shots. This feature makes them ideal for use with steel and other non-toxic shot sizes without sacrificing pattern integrity. They also have a very smooth interior finish for consistent patterns every time.
All Carlson’s choke tubes are proudly manufactured in the USA. Carlson’s Choke Tube 12 Gauge Cremator Non-Ported is the right choke tube for your shotgun. This non-ported choke tube offers a full constriction that will help with muzzle protection. The extended choke tube has an easy-to-install design, no tools required! Carlson’s Choke Tube is made of high-quality steel and is backed by a lifetime warranty. Available in turkey, goose, and steel shot sizes.
Positive
- Protects the muzzle of the gun
- Can be changed easily on the range
- Works with steel, lead, copper, or hevi-shot
- Will help with clean and precise kills in any hunting season
Negatives
5. Carlson’s Skeet Choke
[content-egg-block template=custom/all_offers_logo groups=”p5″]
Specifications
- Compatible With:
12 Gauge
- Size:
0.725
- Material:
Stainless Steel
A choke tube is a device that is inserted into the barrel of a shotgun to change its effective range and patterning characteristics. Choke tubes are available in many different sizes, with varying degrees of effectiveness. Some models are “ported” which means they have small holes drilled through them to reduce muzzle blast, recoil, and/or improve patterning by venting propellant gases forward rather than rearward. The Carlson’s Choke Tube 12 Gauge Cremator Non-Ported works with Winchester, Mossberg 500, Browning Invector, Weatherby, and Savage 12 gauge shotguns.
Positive
- Compact size for easy carrying
- Compatible with all loads and a wide variety of guns
- Reduces the recoil of the weapon
- Doesn’t need to be tightened down again once it is installed
Negatives
- Cannot be installed without a wrench/tool
What To Consider While Buying The Best Choke for Rabbit Hunting?
Here are the factors that need to be taken into account when selecting a choke for your shotgun.
Constriction
Shotgun chokes are classified by constriction (the amount of restriction provided on the shot column as it passes through the choke), and by their “choke designation” (which typically consists of one to three letters). For example, a choke with the designation of “CYL” has cylindrical restriction and is the most common choke for trap and skeet shooting. A choke with a designation of “IC” (meaning “improved cylinder”) provides only partial cylindrical constriction and is often used by hunters to improve patterns on long-range shots.
Internal Diameter
Shotgun chokes are manufactured with a variety of different inside diameters. In general, the tighter the choke, measured either in terms of its constriction or “choke designation”, the denser the pattern will be at a given distance from the muzzle. Conversely, a looser choke will produce a less dense pattern even at very close range.
Cylinder (.000″)
Least Restrictive, used for most shooting situations. Fairly open pattern with little reduction ineffectiveness at ranges beyond 35 yards or so.
Improved Cylinder (.005″)
Improved cylinder is a step up from cylinder, but still quite open.
Modified (.015″)
Modified is very similar to Improved Cylinder, but it is just a bit tighter and thus provides slightly denser patterns than an Improved Cylinder choke at the muzzle and beyond.
Full (.020″)
The most restrictive of all commercially produced shotgun chokes available for typical shotgun barrels. A Full choke is very restrictive, but it will give you an effective range of about 30-35 yards.
Extra full (.030″)
Extra full or “triple full” chokes are the tightest commercially produced choke for a typical shotgun. Despite this extreme level of constriction, triple full chokes work out to an effective range of about 25 yards.
Material
Chokes are made from high-strength alloys, stainless steel, or other materials depending on the use to which the choke is likely to be put and the degree of wear it may be expected to encounter. Chokes intended for use with lead shot may be made from phosphor bronze, monel, or iron. Chokes used in competition and where the highest standards of performanceand reliabilityare required may be made in high strength stainless steel alloy. Waterfowl chokes typically have a gold finish to resist corrosion.
Shotgun Compatibility
Chokes are made with screw-in constrictions and with longer parallel section shanks that fit into the muzzle of a shotgun barrel by means of an adapter: Amongst screw-in chokes, ¼ and ⅜ inch (6.35 and 9.52 mm) threads with corresponding bore diameters and constrictions are standardized for use with 12 and 20 gauge shotguns. Shotguns with magnum-length chambers (for example 3½ inch chamber) may require a different choke size to be installed than would otherwise be dictated by the gauge of the gun. Pairs of adapters for each gauge comprise one set, sized specifically to fit common barrel contours.
Ammo
The choke may be adjusted for different types of load, game, or shooting conditions: For example, Skeet chokes are designed to deliver a relatively even but concentrated pattern at 25 yards (22m), whilst Improved Cylinder and Modified chokes will give about an 80% shot pattern at 40 yards (37m).
Ease of Installation and Removal
Screw-in chokes may be removed and replaced to allow the use of different choke constrictions, or replaced with chokes of a different degree of choke. Wrenchless installation chokes are the best ones if you need to change them frequently on a hunting trip. If you want to use a single choke for a long time, you can use one that is screwed on with a wrench. Even if it is a choke that needs a wrench to install and remove, go with the one that can be installed with any wrench and not with just the one that comes with it.
Price
Choke prices range from high-quality “muzzle loading” chokes for muzzle-loading shotguns that retail at around $100 per pair up to high-quality aftermarket chokes (including extended choke tubes) that can cost $400 or more.
FAQs
[ultimate-faqs include_category=’Best-Choke-for-Rabbit-Hunting’]
Conclusion
We hope this article has helped you find the perfect choke for your rabbit hunting needs. If you’re looking to read more about hunting, don’t hesitate to come back and browse our other articles on different topics like gun accessories or how to clean a shotgun. You can also sign up for our newsletter if you want to be notified when we publish new content! All the best in your hunts ahead.